Wireless Solution R-512 Micro Lite Manual do Utilizador Página 3

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 9
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 2
w i r e l e s s
s o l u t i o n
Specifications
DMX interface
Full compliance with USITT DMX-512 (1990) & 512-A standards
Maximum number of transceivers on a single bus: 32
(compliant with the EIA/TIA RS-485 standard)
Data Rate: 250 kbps (slew rate limited to minimise EMI)
Electrostatic discharge protection: ±15kV
DMX frame rate and frame size: Auto sensing
Frame rate: 1 (min) to 44 (max) frames per second
Frame size: 1 (min) to 512 (max) channels
Loss of DMX input or radio link: After one second (if there is no
resumption), the DMX output will cease to transmit and go into
a high impedance mode.
Recovery from loss of DMX input or radio link: Less than 1 second.
Power characteristics
High voltage input: 90-260VAC
Low voltage input: 12VDC (R-512 Pro: 12-24VDC)
Average current : 200mA @ 12VDC
Battery operation (R-512 Pro only)
2 hours operation from fully charged
RF characteristics
W-DMX
TM
uses Adaptive Frequency Hopping Spread Spectrum
(AFHSS) and changes frequency every 910uS
Operational frequency range: 2402-2479MHz (ISM band)
EU/ASIA RF output power: 20dBm or 100mW
FCC RF output power: 25dBm or 275mW
Channel bandwidth: 1 MHz
Sensitivity at 0.1% Packet Error Rate: 95dBm
Tested link range 450m (Low power EU mode using standard
antennae in an urban area)
Approvals
FCC: 15.247&68 Class B; Canada ICES 003; Japan ARIB STD-T66
CE;
EN 301 489-1; 301 489-17; EN 300-328-1; EN 300-328-2; EN 609 50
Enclosure
Diecast aluminium casing
Operating temp range: R-512: 0
o
C to +55
o
C (32
o
F to 131
o
F)
R-512 Pro: -20
o
C to +55
o
C (-4
o
F to 131
o
F)
Dimensions (W x H x D): 219 x 45 x 131mm (8.6” x 1.8” x 5.2”)
Weight: 1005g / 35.45oz
Connectors
N-type female antenna connector, N RP-SMA adaptor included
2 Neutrik
®
XLR 5-pin gold plated DMX connectors
2 RJ45, DMX over Cat5 cable links
1 DC input, pluggable terminal strip, Phonix
®
MSTB 2,5
1 AC input, IEC-6C
Supplied accessories
AC power cord / DC power connector / Standard antenna
Antenna adaptor / Mounting brackets / User guide
Part codes R-512 R-512 Pro
ETSI/FCC approved A40102 A40104
(power output:
100mW/300mW max.)
Japan ARIB approved A40102J A40104J
(power output:
100mW max.)
Phone: +46 522 511 511
Fax: +46 522 440 885
Web: www.wirelessdmx.com
Wireless Solution Sweden AB
Stureparksvägen 7
451 55 Uddevalla
Sweden
AC power input
(90-250VAC)
DC power
input
RJ-45 DMX
connector
XLR 5pin
DMX out
connector
RJ-45 DMX
connector +
DC power in
XLR 5pin
DMX out
connector
(R-512 Pro only) Press to change between
battery (green indicator) and external
power input (red indicator) operation.
Reserved
Front and rear panel details
Release 1-0d (October 2007) Specifications subject to change without notice
LINK
OFF: Not linked to a transmitter
ON: Linked to a transmitter
RAPID FLASH: Linking with a transmitter
RADIO
Indicates that Level
display is showing
signal strength
BATT Not used
FUNCTION
Press for 5
seconds to unlink
from transmitter
Level Provides indication of radio
signal strength when linked to a transmitter
DATA
ON: Receiving DMX data
TX & CTRL Not used
POWER
ON: Correct power
input present
R-512
RADIO
ON: Indicates that
Level display is show-
ing signal strength
BATT
ON: Indicates that
Level display is
showing battery
charge
Level Provides alternate indications
of radio signal strength and battery charge
every two seconds.
LINK
OFF: Not linked to a transmitter
ON: Linked to a transmitter
RAPID FLASH: Linking with a
transmitter
FUNCTION
Press for 5
seconds to unlink
from transmitter
DATA
ON: Receiving DMX data
TX & CTRL Not used
POWER
OFF: Off or using battery
ON: External power input
FLASH: Charging battery
R-512 Pro
TM
TM
Vista de página 2
1 2 3 4 5 6 7 8 9

Comentários a estes Manuais

Sem comentários